Option information for: Stainless Steel
Colour / Finish:
316 grade stainless steel
Construction:
The spotlight bodies are made from solid metal tube and mounted via adjustable knuckle joints on a round plate supported by a 20cm round-rod mounting spike. Unscrewing the front bezel makes it easy to extract and change the lamp without tools.
Accessories:
There is space inside the spotlight body to fit a 58mm honeycomb glare louvre or a clip-on MR16 spread lens, frosted lens or colour filter accessory onto the front of the lamp.
Lamp Type:
MR16 12v halogen 20-50w, or MR16 3w warm white or blue led module - Order lamps separately
Installation:
1.5 metre of cable fitted. Order 2 x T9962 cable joint kits for connection of 12v model to low voltage cable from a garden lighting transformer. Wire spike spotlights to transformer with 2.5mm� ground burial 2 core low voltage cable available in 50m (T9912) or 25m (T9913) packs: use T9910 4mm� cable for longer runs. The two spotlights may be connected to separate transformers for installation where intensity or spread of lighting may need to be varied by use of two circuits, to compensate for seasonal foliage for example.
Input Voltage:
12v volts � requires power from a remote transformer
Option information for: Copper
Lamp Type:
MR16 12v halogen 20-50w, or MR16 3w warm white or blue led module - Order lamps separately
Installation:
1.5 metre of cable fitted. Order 2 x T9962 cable joint kits for connection of 12v model to low voltage cable from a garden lighting transformer. Wire spike spotlights to transformer with 2.5mm� ground burial 2 core low voltage cable available in 50m (T9912) or 25m (T9913) packs: use T9910 4mm� cable for longer runs. The two spotlights may be connected to separate transformers for installation where intensity or spread of lighting may need to be varied by use of two circuits, to compensate for seasonal foliage for example.
Accessories:
There is space inside the spotlight body to fit a 58mm honeycomb glare louvre or a clip-on MR16 spread lens, frosted lens or colour filter accessory onto the front of the lamp.
Construction:
The spotlight bodies are made from solid metal tube and mounted via adjustable knuckle joints on a round plate supported by a 20cm round-rod mounting spike. Unscrewing the front bezel makes it easy to extract and change the lamp without tools.
Input Voltage:
12v volts � requires power from a remote transformer
