Option information for: Black
Accessories:
Use E2500F frosted lens to diffuse lighting; MR16AHL clip-on honeycomb glare filter and colour filters may be fitted onto the front of the lamp inside the light to create a range of lighting effects. Stirrup bracket can be mounted on optional E2530B black base mount or E2560M brass ground spike: custom mountings for deeper water can be assembled from E2530C and E2530L extension kits.
Lamp Type:
MR16 12v tungsten halogen reflector lamp or MR16 led modules (Order lamp separately) Use 50w underwater only; 35w maximum out of water. Use 10w or 20w lamp maximum or an led module for recessed in walkover surfaces to avoid hot lens
Installation:
Direct connection to a transformer or junction box via 6 metre cable fitted. Stirrup bracket can be mounted on optional E2530B black base mount or E2560M brass ground spike: custom mountings for deeper water can be assembled from E2530C and E2530L extension kits. Avoid cable joints underwater or in wet areas unless the joint is resin filled.
Construction:
Pressure die-cast brass body with brass stirrup bracket. Heat resistant, flush tempered clear glass. Pre-wired with 6 metres of double insulated 1.5mm HO&-RNF cable via a brass cable gland and high temperature O ring seal. Lens bezel & "U" bracket secured by stainless steel screws with allen key heads.
Input Voltage:
12v volts requires power from a remote transformer
Colour / Finish:
Black powder-coated brass
Option information for: Brass
Accessories:
Use E2500F frosted lens to diffuse lighting; MR16AHL clip-on honeycomb glare filter and colour filters may be fitted onto the front of the lamp inside the light to create a range of lighting effects. Stirrup bracket can be mounted on optional E2560B base mounting or E2560M ground spike: custom mountings for deeper water can be assembled from E2560C and E2560L extension kits. Use E2560N recess niche & sleeve for recessed installation in paving and walls.
Lamp Type:
MR16 12v tungsten halogen reflector lamp or MR16 led modules (Order lamp separately) Use 50w underwater only; 35w maximum out of water. Use 10w or 20w lamp maximum or an led module for recessed in walkover surfaces to avoid hot lens
Installation:
Direct connection to a transformer or junction box via 6 metre cable fitted. Stirrup bracket can be mounted on optional E2560B base mounting or E2560M ground spike: custom mountings for deeper water can be assembled from E2560C and E2560L extension kits. With the stirrup bracket removed Mariner is a good recessed light for use with small features or as an uplight in lawns. Use E2560N recess niche & sleeve for recessed installation in paving and walls. Avoid cable joints underwater or in wet areas unless the joint is resin filled.
Input Voltage:
12v volts requires power from a remote transformer
Construction:
Pressure die-cast brass body with brass stirrup bracket. Heat resistant, flush tempered clear glass. Pre-wired with 6 metres of double insulated 1.5mm HO&-RNF cable via a brass cable gland and high temperature O ring seal. Lens bezel & "U" bracket secured by stainless steel screws with allen key heads.
Colour / Finish:
Sandblasted natural brass