The Light Symphony 2 channel Keyfob Starter Kit comprises one 2 Channel 2KW Lighting Control Unit and a 2 channel keyfob. Each channel is fully rated for an inductive load for remote control of fluorescent outdoor lighting, low voltage garden lighting or metal halide exterior lighting without de-rating.
2 ZONE Key Fob is a remote control with a hard wearing stainless steel facia, sliding key cover and 350m range, which is extendable using repeater units
The Lighting Control Unit provides 2 wirelessly controllable outputs each rated at 1000W and suitable for all load types. It provides flexible control for any lighting circuit or pump and is quickly configurable as a simple switch, group (zone) or scene controller, with 9 memories and a master on/off. Output 1 can be programmed as a switched or dimmable output. Output 2 is switched only. The dimming mode provides a soft-on, soft-off feature with filament pre-heating, which can greatly increases lamp life.The separately fused outputs are fully protected against over current and over temperature. Large 10mm? cable terminations, standard (20mm) gland cut-outs and an earth bonded gland-chassis simplify installation.The built-in signal-strength indicator, zero-volt mains switching and power-on surge protection all enhance reliability. Lid-on programming speeds commissioning and reduces the risk of water ingress during installation.
|
The keyfob has a master ”garden on/off” featurein addition to 2 zone keys
The Lighting Control Module (LCM) ”hears” the wireless commands from any of Light Symphony”s controllers. The Garden On/Off button will switch all outputs together, providing a convenient master control. |
|---|---|
|
350 metre wireless range line-of-site |
|
IP44 (splash-proof), wipe clean Grey ABS, colour RAL7011 |
|
Controller: 135x70x25mm |
|
434.075MHz Narrow Band FM. |
|
Security channels 1-16. |
|
2x AA batteries (for clock backup) |
|
EN220300, EN500811 To EN500821 |
Downloads
