The Elipta Kensington Outdoor Post Light 240v (Graphite) LED outdoor wall light with a unique simplistic design and powder coated, grey finish make it a suitable light for traditional and contemporary style houses. The E27 lamp holder sits within toughened, clear glass panels and allow the use of ‘retro-style’ filament LED lamps, saving on energy consumption whilst complimenting traditional design features. A choice of LED filament ES-E27, dimmable LED lamps, are also available.
|
Powder coated graphite grey |
|---|---|
|
Die cast aluminium frame with 4 x toughened, clear glass panels |
|
IP54 |
|
240v |
|
15w |
|
There are 2 cable glands in the bottom of the fitting which accept up to 10mm diameter cable. One cable gland is blanked off. By removing the blanking plug you can wire in a daisy chain.
Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation |
