The Elipta Polus Asymmetric LED Spotlight (stainless steel) is designed for lighting small trees and facades from a close position. The Polus is a high quality, LED recessed garden lighting fixture with an asymmetric reflector capable of projecting a medium 45° beam upwards to light a tree canopy or facade while still providing coverage at the base. Also suitable to use as an outside recessed LED light, positioned at the foot of an outside wall, and being particularly effective at guarding against glare and where the control of the light spread is important.
|
316 stainless steel |
|---|---|
|
IP67 |
|
316 grade Stainless steel top plate is attached to tubular aluminium body which push fits into the aluminium tube, where it is held firmly in place by an o-ring, leaving a front plate with no visible fixing screws. 1.5m cable via rear entry cable. |
|
240v |
|
9w |
|
600lm |
|
45° |
|
2700K warm white |
|
Approximately 50,000 hours |
|
The aluminium sleeve is built in during construction or retrofitted into a hole cut with a coring bit: the light pushes into the tube, where it is held firmly in place by an o-ring.
Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation. |
